CD800a

In Stock

CD800a

4000 counts
Best accuracy 0.7?
Auto power off(30min.)(cancelable)
Low power ohm(input voltage 0.4V)at continuity range
Solid & portective body cover that can also be used as a tilt stand
Chip resister holder behind the body cover

Product Catalogue

LKR 15,075

In stock

Monthly From 2,964.75

Sampath Bank Payment Plans

The installment payment calculations now include the VAT(18%) amount of Rs.2713.5, bringing the total cost to Rs.17788.5. All displayed amounts reflect this inclusive pricing for complete transparency.

Month(s)	Handling Fee (%)	Monthly (Approx)	Total (Approx)
3	0.00%	5,929.50	17,788.50
6	0.00%	2,964.75	17,788.50

Have questions? Chat with us on WhatsApp. We're here to help!

CD800a	Measuring range	Best accuracy	Resolution	Input impedance
DCV	400m/4/40/400/600V	±(0.7%+3)	0.1mV	10M～100MΩ
ACV	4/40/400/600V	±(1.6%+5)	0.001V	10M～11MΩ
DCA	40m/400mA	±(2.2%+5)	0.01mA
ACA	40m/400mA	±(2.8%+5)	0.01mA
Resistance	400/4k/40k/400k/4M/40MΩ	±(1.2%+5)	0.1Ω
Capacitance	50n/500n/5μ/50μ/100μF	±(5%+10)	0.01nF
Frequency	5Hz～100kHz	±（0.5%+3)
Duty cycle	20%～80%	±（0.5%+5)
Continuity	Buzzer sounds at between 10Ω and 120Ω Open voltage:Approx.0.4V
Diode test	Open voltage:approx.1.5V

Display	numeral display 4000
Sampling rate	3 times/sec.
Bandwidth	40Hz～400Hz
Fuse	0.5A/250V 1.5kA Φ5×20 Ceramic
Battery	R6P(1.5V)x2
Battery life	Approx.500h (manganese battery) at DCV range
Size/Mass	H176×W104×D46mm/Approx.340g
Test lead length/Pin tip	Length: approx. 0.7m/19mm

This instrument is portable multimeter designed for the measurement of low-voltage circuit. This is used at small communications equipment’s, home electric appliances, voltage of lump line, and measurement of various types of batteries.

Frequency

Expressed in the unit of Hz (hertz). Commercial frequency of 50Hz/60Hz can be measured.
Capacitor

Capacitor capacity (electrostatic capacity) is measured and expressed in the unit of F (farad), ?F, etc.
Duty cycle

The duty cycle of repeating waveform is indicated on a percentage basis (%). It can be used for the analysis of control signals.
Continuity buzzer

The buzzer sounds when the measuring object is electrically conducting.
Auto power off

Power is automatically turned off when a certain time has elapsed after power-up. Some models have a function to cancel this function.
Data hold

A value indicated on the display is fixed. It is fixed even after the test lead is removed, and can be used as a record for reference purposes.
Range hold

The range is fixed in the measurement of varying voltage and current which is difficult to read in the auto range.
Measurement of relative value

A certain measured value is assumed as 0 and measured values after that are expressed by positive or negative values relative the value fixed as 0.
Low power ohm

Resistance is measured by applying voltage of approximately 0.4V or less on a measuring object. It is characterized by the fact that the semiconductor does not conduct at approximately 0.4V or less even in forward direction.