HIOKI CM4371 AC/DC CLAMP METER CM4371
Out of stock
Key Features
- Multiple measurement functions
- Automatic AC/DC function helps boost work efficiency
- Measure DC voltages of up to 1700 V (*1) for open voltage inspections of solar panels
- Simultaneously measure inrush current in RMS and crest values
- Expanded -25 °C to 65 °C operating temperature range
- IP54 dustproof and waterproof enclosure
Jaws (current sensor portion): IP50
LKR 473,000
Out of stock
Compare
Hioki clamp meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. Model CM4371 is a 600A True RMS clamp meter that features stronger jaws, broader -25°C to 65°C operating temperature range and IP54 dustproof and waterproof enclosure to enable professionals to work quickly in tough situations including the development, repair, and maintenance of equipment and devices such as electric vehicles. Additionally, the high-voltage DC measurement capability of up to 1700 V (*1) is ideal for the clamp maintenance inspections of electrical and solar power equipment.
CAT IV 600 V, CAT III 1000 V
Germany iF Design Award CM4371 series
Current Measurement Function: How to Use the Hioki CM4370 Series Clamp Meters
Learn how to effectively use the current measurement function with this short video.
Auto Hold Function: How to Use the Hioki CM4370 Series Clamp Meters
The Auto Hold feature is perfect in situations where the display is hard to read because the clamped wires are in hard to reach locations. With Auto Hold, measured results automatically freeze on the display until the next measurement starts, making testing and record taking a snap.
Max/Min/AVG/Peak Function: How to Use the Hioki CM4370 Series Clamp Meters
Watch this video to learn how to capture the maximum, minimum, average and peak values of a current signal, available when the AUTO AC/DC mode is not in use.
Simultaneous Display of DC Current and DC Voltage: How to Use the Hioki CM4370 Series Clamp Meters
The CM4370 Series can measure both DC current and DC voltage with a single device at the same time, making it ideal for automotive battery testing and inspection and maintenance of solar panels.
Inrush Measurement Function: How to Use the Hioki CM4370 Series Clamp Meters
Accurately measure the startup or inrush current of motors and equipment. The CM4370 series is engineered to detect the full startup current period and then identify the RMS waveform as well as the highest waveform peak.
Voltage Measurement Function: How to Use the Hioki CM4370 Series Clamp Meters
The DMM function of the AC/DC clamp meter is advanced enough to measure up to 1700V AC/DC. Watch this video to learn more.
Continuity Check Function: How to Use the Hioki CM4370 Series Clamp Meters
The DMM function of the AC/DC clamp meter also provides a continuity check function. Easily detect short-circuits with the clear buzzer and red LED.
AC Voltage Detection Function: How to Use the Hioki CM4370 Series Clamp Meters
The tip of the current sensor of the CM4370 Series can also detect live voltages, eliminating the need for you to use a separate voltage detector. Energized lines are identified with a loud buzzer and red LED on the clamp meter.
HIOKI CM4371 AC/DC CLAMP METER CM4371
| Size | |
|---|---|
| Colour | |
| Type |
Basic specifications
| DC Current range | 20.00 A/600.0 A, Basic accuracy: ±1.3% rdg. ±0.08 A (20 A range) | |||||
|---|---|---|---|---|---|---|
| AC Current range | 20.00 A/600.0 A (10 Hz to 1 kHz, True RMS), Basic accuracy: ±1.3% rdg. ±0.08 A (at 20 A) | |||||
| Crest factor | 20.00 A range: 7.5 600.0 A range: 3 or less |
|||||
| DC+AC Current range | 20.00 A/600.0 A (10 Hz to 1 kHz, True RMS), Basic accuracy DC, 45-66 Hz: ±1.3% rdg. ±0.13 A (at 20 A) | |||||
| DC Voltage range | 600.0 mV to 1700 V (*1), 5 ranges, Basic accuracy: ±0.5% rdg. ±0.5 mV (at 600 mV) | |||||
| AC Voltage range | 6.000 V to 1000 V, 4 ranges (15 Hz to 1 kHz, True RMS), Basic accuracy 45 – 66 Hz: ±0.9% rdg. ±0.013 V (at 6 V) | |||||
| DC+AC Voltage range | 6.000 V to 1000 V, 4 ranges, Basic accuracy DC, 45 – 66 Hz: ±1.0% rdg. ±0.023 V (at 6 V) | |||||
| Resistance range | 600.0 Ω to 600.0 kΩ, 4 ranges, Basic accuracy: ±0.7% rdg. ±0.5 Ω (at 600 Ω) | |||||
| Capacitance range | 1.000 μF to 1000 μF, 4 ranges, Basic accuracy: ±1.9% rdg. ±0.005 μF (at 1 μF) | |||||
| Frequency range | 9.999 Hz to 999.9 Hz, 3 ranges, Basic accuracy: ±0.1% rdg. ±0.003 Hz (at 9.999 Hz) | |||||
| Temperature (K) | -40.0 to 400.0 ˚C, add temperature probe accuracy to basic accuracy of ±0.5% rdg. ±3.0 ˚C | |||||
| Voltage detection | Hi: 40 V to 600 V AC, Lo: 80 V to 600 V AC, 50/60 Hz | |||||
| Other functions | Automatic AC/DC detection, Plus/Minus judgement function of DC A, DC V, Max/Min/Average/PEAK MAX/ PEAK MIN value display, Filter function, Display value hold, Auto hold, Back light, Auto-power save, Buzzer sounds, Zero-adjustment | |||||
| Dustproof, waterproof | Grip: IP54 (when measuring an insulated conductor only), Jaw (the current sensor portion of the instrument)/ barrier: IP50 *Risk of electric shock from the conductor being measured increases when wet. | |||||
| Power supply | LR03 Alkaline battery ×2, Continuous use 45 hr (Backlight OFF) | |||||
| Core jaw diameter | φ33 mm (1.30 in), Jaw dimension: 69 mm (2.72 in) W× 14 mm (0.55 in) D | |||||
| Dimensions and mass | 65 mm (2.56 in) W × 215 mm (8.46 in) H × 35 mm (1.38 in) D mm, 340 g (12.0 oz) | |||||
| Included accessories | TEST LEAD L9207-10, CARRYING CASE C0203, LR03 Alkaline battery ×2, Instruction Manual×1 | |||||
Based on 0 reviews
Be the first to review “HIOKI CM4371 AC/DC CLAMP METER CM4371”
Related products
-
0% Interest free Installment Plan for Sampath & Commercial Bank Credit Cards, Clamp Meters, Daily Offers, Fluke, On Sale, Testing & Measuring
Fluke 374 FC True-RMS AC/DC Clamp Meter
0% Interest free Installment Plan for Sampath & Commercial Bank Credit Cards, Clamp Meters, Daily Offers, Fluke, On Sale, Testing & MeasuringFluke 374 FC True-RMS AC/DC Clamp Meter
Key features
- Advanced clamp meter that transmits measurements to your smartphone via Fluke Connect® for viewing at a safer distance
- Performs AC and DC current measurements to 600 A, and AC and DC voltage measurements to 1000 V
- Measures AC current to 2500 A AC with optional iFlex flexible current probe
- Measures resistance to 6000 Ω with continuity detection
SKU: n/a -
Clamp Meters, Fluke, Testing & Measuring
Fluke 378 FC Non-Contact Voltage True-rms AC/DC Clamp Meter with iFlex
Clamp Meters, Fluke, Testing & MeasuringFluke 378 FC Non-Contact Voltage True-rms AC/DC Clamp Meter with iFlex
Key features
- Measure voltage and current with your clamp jaw
- Faster, safer testing – all without touching a live wire – using FieldSense™ technology
- Power quality indicator shows whether equipment or power line is faulty
- Complete 3-phase voltage and current tests in 3 quick steps
SKU: n/a
There are no reviews yet.