FLUKE MS2-TTK Microscanner 2 Termination Test Kit

Out of Stock

FLUKE MS2-TTK Microscanner 2 Termination Test Kit

Key features

  • Graphical wire map, length, cable ID, & distance to fault
  • MicroScanner² cable tester, punch down tool, tone generator & probe
  • Tests all common media types including RJ11, RJ45, & Coax
  • Locates virtually any cable w/ IntelliTone™ digital & analog toning
  • Verifies media services: 10/100/1000 Ethernet, POTS, & PoE

Product Catalogue

LKR 575,720

Out of stock

Easy Payment Plans

Sampath Bank Payment Plans
The installment payment calculations now include the VAT(18%) amount of Rs.103629.6, bringing the total cost to Rs.679349.6. All displayed amounts reflect this inclusive pricing for complete transparency.
Month(s) Handling Fee (%) Monthly (Approx) Total (Approx)
3 0.00% 226,449.87 679,349.60
6 0.00% 113,224.93 679,349.60
Commercial Bank Payment Plans
The installment payment calculations now include the VAT(18%) amount of Rs.103629.6, bringing the total cost to Rs.679349.6. All displayed amounts reflect this inclusive pricing for complete transparency.
Month(s) Handling Fee (%) Monthly (Approx) Total (Approx)
6 0.00% 113,224.93 679,349.60

FLUKE MS2-TTK Microscanner 2 Termination Test Kit

  • Size:
  • Colour:
  • Type:

Specifications: Fluke Networks MS2-TTK MicroScanner² Network Cable Tester Kit

MicroScanner2 and MicroScanner PoE Specifications

Specifications apply at 23 °C (73 °F), unless otherwise noted.

Environmental Specifications
Operating temperature 32 °F to 113 °F (0 °C to 45 °C)
Storage temperature -4 °F to +140 °F (-20 °C to +60 °C)
Operating relative humidity (% RH without condensation) 90 % (50 °F to 95 °F 10 °C to 35 °C)
75 % (95 °F to 113 °F 35 °C to 45 °C)
Shock and Vibration Random, 2 g, 5 Hz-500 Hz (Class 2)
1 m drop test with and without wiremap adapter attached
Safety IEC 61010-1 3rd Edition
Altitude 4,000 m; Storage: 12,000 m
EMC IEC 61326-1
General Specifications
Test connectors Shielded 8-pin modular jack accepts 8-pin modular (RJ45) and 4-pin modular (RJ11) plugs. MicroScanner2: F-connector for coaxial cable.
Power Battery type: 2 AA (NEDA 15A, IEC LR6) alkaline batteries
Battery life: 20 hours of typical use
Other compatible battery types: 2 AA photo lithium, NIMH, NICAD
Dimensions and weight (with batteries installed and wiremap adapter attached) 3 in x 6.4in x 1.4 in (7.6 cm x 16.3 cm x 3.6 cm) MicroScanner2: 10.6 oz (300 g) MicroScanner PoE: 10.6 oz (300 g)
Display Monochrome LCD with backlight
Test Modes
Cable test Measures length, verifies wiremap, identifies remote ID locators, and detects Ethernet ports. MicroScanner PoE also shows HIGH Ω when the resistance of the cable is more than 12.5 Ω. Displays results on one screen.
Tone Generates Intellitone™ and normal analog toning signals
PoE MicroScanner2: Solicits and detects the presence of 802.3af compatible PoE (Power over Ethernet) devices MicroScanner PoE: Solicits and detects the presence of 802.3af, at, bt, and UPOE (Cisco’s Universal Power over Ethernet) compatible PoE devices
Performance Specifications
Cable types tested Twisted pair: UTP, FTP, SSTP
Coaxial (MicroScanner2): 75 Ω, 50 Ω, 93 Ω
Length test Range: 460 m (1500 ft)
Resolution: 0.3 m (1 ft)
Typical accuracy: ± 4% or 0.6 m (2 ft) whichever is greater. NVP uncertainty is an additional error.
Calibration: User-settable NVP for twisted pair and coax (MicroScanner2). Can determine actual NVP with known length of cable.
Wiremap test Detects single-wire faults, shorts, miswires, split pairs, and up to seven far-end adapter IDs. The wiremap is drawn with proportional length to visually indicate the approximate location of faults.
Ethernet port detection MicroScanner2: Detects the advertised speed of 802.3 Ethernet ports with speeds of 10 Mbps, 100 Mbps, and 1 Gbps. MicroScanner PoE: Detects the advertised speed of 802.3 Ethernet ports with speeds of 10 Mbps, 100 Mbps, 1 Gbps, 2.5 Gbps, 5 Gbps, and 10 Gbps.
Tone generator Supports toning and cable mapping with a Fluke Networks digital IntelliTone™ probe. Generates four tones compatible with typical analog probes. SmartTone™ feature gives positive identification of cables in bundles when using an IntelliTone or an analog probe.

Product overview: Fluke Networks MS2-TTK MicroScanner² Network Cable Tester Kit

MS2-TTK MicroScanner² copper cable verifier kit helps find common errors by displaying graphical wiremap, pair lengths, distance to fault, and far end device. Integrated RJ11, RJ45, and coax test ports support many types of low-voltage cable testing with no need for adapters

Reviews

There are no reviews yet.

Be the first to review “FLUKE MS2-TTK Microscanner 2 Termination Test Kit”

Your email address will not be published. Required fields are marked *

Related Products

In Stock

KEW 1020R DIGITAL MULTIMETER
LKR 41,750

Out of stock

SimpliFiber® Pro Optical Pow...

Out of stock

FI-500 FiberInspector™ Micro...

Out of stock

Fiber Optic Cleaning Kits

Out of stock

OptiFiber® Pro OTDR Family

Out of stock

Fluke Networks FiberLert™ De...

Out of stock

Fiber QuickMap™

Out of stock

CertiFiber® Pro Optical Loss...

Out of stock

FI-7000 FiberInspector™ Pro

Out of stock

Fluke Networks Pro3000™ Tone...

Product Search

Request Quote