KEW 5515
In stock
Safety with non-contact temperature measurements
• Single laser allows more accurate measurements.
• Back light display helps to read in a dark place.
• Dual display: Main display shows the measured values and Sub
display shows either of max, min, average or thermocouple value.
• Alarm function: The upper and lower temperature limits can be set.
• The red blinking back light indicates that the measured value is
below or over the pre-set limits.
• Temperature measurement with a K-type thermocouple is also
possible.
(K-type thermocouple is not supplied with the product.)
＊ This tester can measure human skin (surface) temperature
but isn’t suitable for body temperature measurement.
LKR 38,846
In stock
Compare
DANGER
The connector for thermocouple is not insulated. Do not make measurement using a thermocouple when there is a risk of electrical shock hazard.
WARNING
• Do not look directly into the laser.
• Do not point the laser directly at persons or animals.
• When measuring a reflective object such as mirrors, take extra caution so as not to look diffuse
reflections.
• Keep out of reach of child or person who doesn’t have the Product handling knowledge.
• Use the Product only as specified. Do not disassemble or modify the Product.
Display features
Relation of distance and measuring diameter
Display / Buttons
KEW 5515
| Colour | |
|---|---|
| Size |
| Infrared Thermometer | |||||||
|---|---|---|---|---|---|---|---|
| Measuring range | -32 – 535ºC | ||||||
| Accuracy | ±3.0ºC (-32 – -20 ºC), ±2.0ºC (-20 – +100ºC), ±2%rdg (100 – 535ºC) | ||||||
| Measuring element | Thermopile | ||||||
| Infrared spectral band | 5 – 14μm | ||||||
| Measuring diameter | 1000mm/ ø78mm (Distance/ Measuring dia.: 12:1) | ||||||
| Repeatability | Within ±1ºC | ||||||
| Emissivity | Variable between 0.10 and 1.00 (by 0.01 steps), Before shipment: 0.95 | ||||||
| Collimation | Laser beam (Class 2, 630 – 670nm, 1mW or less) specifies the center. | ||||||
| Thermocouple | |||||||
| Thermocouple | K-type* | ||||||
| Measuring range of thermocouple |
-199 – 1372ºC | ||||||
| Accuracy of thermocouple |
±1.5%rdg+1ºC (-40 – 1372ºC) | ||||||
| Response | 500ms | ||||||
| Resolution | 0.1ºC | ||||||
| Auto power off | If no key is pressed for 6 seconds, the power is shut off automatically. | ||||||
| LCD display | LCD with back light (blinks in red when alarm function is activated) | ||||||
| Dual display | Simultaneous display (Measured value and either of max, min, average or thermocouple value.) |
||||||
| Operating temperature & humidity | 0 – 50ºC/ 10 – 90% RH | ||||||
| Applicable standards | IEC 61326, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-8, IEC60825-1 | ||||||
| Battery | 6F22(9V) × 1 | ||||||
| Dimension | 180 (L)×130 (W)×40 (D) mm | ||||||
| Weight | Approx. 195g (excluding battery) | ||||||
| Accessories | 9152(Carrying case), 6F22(9V) × 1, Instruction manual | ||||||
* Commercial K-type thermocouple can be used with the product.
Based on 0 reviews
Be the first to review “KEW 5515”
Related products
-
EXTECH, IR Thermometers, Testing & Measuring, Thermometers
IR267: Mini IR Thermometer with Type-K Input
EXTECH, IR Thermometers, Testing & Measuring, ThermometersIR267: Mini IR Thermometer with Type-K Input
- Displays Ambient (Air) Temperature and non-contact InfraRed or Type K thermocouple readings simultaneously
- 12:1 distance to target ratio
- Built-in laser pointer identifies target area
- Adjustable emissivity for better accuracy on variety of surfaces
- Programmable high/low alarm alerts user visually and audibly when temperature exceeds set limits (audible alarm can be muted)
- MAX/MIN/AVG/DIF function displays maximum, minimum, average, and MAX minus MIN values
- Automatic Data Hold when trigger released
- Bright white backlighting illuminates display for taking measurements at night or in areas with low background light levels
- Auto power off approx 10 seconds after trigger is released
- Complete with 9V battery, and general purpose Type K bead wire temperature probe
SKU: n/a -
EXTECH, IR Thermometers, Testing & Measuring, Thermometers
IR270: IR Thermometer with Color Alert
- Take non-contact temperature measurements from -4 to 1202°F (-20 to 650°C)
- Max resolution of 0.1°F/°C and basic accuracy of ±(1% of reading 2°F/1°C)
- 12:1 distance to spot (target) ratio
- Built-in laser pointer identifies target area with on/off button
- Programmable Hi/Low alarms with audible beeper — tri-color LCD display changes to Blue backlight when reading goes below low alarm setting and Red backlight when reading exceeds High set point
- Adjustable emissivity (0.10 to 1.00) increases measurement accuracy
- Record/Recall up to 20 readings
- Automatic Data Hold when trigger released
- MAX/MIN/AVG/DIF functions
- Bright white backlighting illuminates display for taking measurements at night or in areas with low background light levels
- Auto power off
- Low battery indicator
- Dimensions: 7.1×4.2×1.6″ (180x107x40mm)
- Weight: 5.3oz (150g)
- Complete with 9V battery and pouch
SKU: n/a -
0% Interest free Installment Plan for Sampath & Commercial Bank Credit Cards, Fluke, IR Thermometers, Testing & Measuring
62 MAX+ Handheld Infrared Laser Thermometer
0% Interest free Installment Plan for Sampath & Commercial Bank Credit Cards, Fluke, IR Thermometers, Testing & Measuring62 MAX+ Handheld Infrared Laser Thermometer
Key features
- Extremely rugged – 3-meter drop tested, IP54 for dust and moisture
- Precise dual-lasers for more accurate, repeatable measurements
- Provides up to a 12:1 Distance to spot ratio
SKU: n/a -
0% Interest free Installment Plan for Sampath & Commercial Bank Credit Cards, Contact Thermometers, Fluke, IR Thermometers, Testing & Measuring, Thermometers
568 Contact & Infrared Temperature Gun
0% Interest free Installment Plan for Sampath & Commercial Bank Credit Cards, Contact Thermometers, Fluke, IR Thermometers, Testing & Measuring, Thermometers568 Contact & Infrared Temperature Gun
- Combines the functionality of both contact and non-contact thermometers in a single device
- Capable of accurately measuring a wide temperature range, from -40°C to 800°C (-40°F to 1472°F), with precision up to +1.0°C or +1.0% of the reading (whichever is greater)
- Boasts a robust, ergonomic design built to withstand challenging industrial, electrical, and mechanical settings
- Provides an impressive distance-to-spot ratio of 50:1, ensuring accurate measurements from a safe distance
- Compatible with the majority of K-type thermocouples, offering versatility and convenience
SKU: n/a
There are no reviews yet.