Online Exclusive Offers
Hurry up! 40%
Hurry up! 15%
Hurry up! 40%
Hurry up! 40%
Hurry up! 9%
Hurry up! 40%
Hurry up! 40%
-
Digital Multimeters
-
Analogue Multimeters
-
Clamp Meters
-
Earth Testers
-
Multi Function Testers
-
Insulation Testers
-
Solar Test Tools
-
Thermometers
-
Moisture Testers
-
Socket Testers
-
PH Meters
-
Cable Testers
-
Air Flow Meters
-
Air Quality Meters
-
Humidity Meters
-
Water Qaulity Meters
-
Hygro-Thermometers
-
Full Face Gas Masks
-
EXTECH, On Sale, Testing & Measuring, Vibration Meters, Vibration Testers
Extech VB400
- Measures RMS Acceleration and Velocity with metric and imperial units of measure
- Measurement ranges:
- Acceleration (RMS): 656ft/s2; 20.39g; 200m/s2
- Velocity (RMS): 7.87in/s; 2.00cm/s; 200mm/s
- Wide frequency range of 10Hz to 1kHz
- Resolution to 1ft/s2; 0.01g; 0.1m/s2 and 0.02in/s; 0.01cm/s; 0.1mm/s
- Basic accuracy of ±(5% + 2 digits)
- Zero adjustment, Data Hold, Low battery indicator
- Water and dust resistant to IP65
- Complete with test pin tip, magnetic base, 4 x AAA batteries, and pouch case
SKU: n/a -
Keson, Measuring Wheels, Tools & Utilities
KESON RRT12 TOP READING, CENTER-LINE WHEELStt
FEATURES
- Enhanced grip pistol-type handle increases control and comfort.
- Re-set on the handle AND on the unit housing — no more bending over, lifting the wheel or stepping on it to reset to zero. Additionally, the re-set on the housing is reinforced to protect it when re-setting the counter with your foot.
- Brake on pistol grip — stops counting instantly. Stop adding lengths accidentally by putting the brake on exactly when you need it.
- Collapsing hinge — snaps into extended lock with the flick of the wrist and it disconnects if you forget to press the unlock trigger.
- Center-line handle design with counter on top of wheel — center of gravity aligned for perfect balance. This makes measuring easier and more accurate. The raised counter makes reading it easier.
- Compact fold-down — easily reduces to 1/2 its size for storage and portability. Storage is a snap.
- Flip-down kickstand (3 foot size) — keeps the wheel upright when you need your hands free to perform other tasks and stays out of the way as you measure.
- Gear & shaft transmission for highest measurement accuracy and strength. No belts to stretch or fail.
- Handle lock — lock your handle in place when you’re not using the wheel. Our clamp protects the extension hinge from breaking.
- Bags available for these wheels
SKU: n/a -
-
Adela, Body Harness
Full Body Harness Adela HS4501 & Lanyard with Energy Absorber Adela EF32 Type E 45
Adela, Body HarnessFull Body Harness Adela HS4501 & Lanyard with Energy Absorber Adela EF32 Type E 45
- Full Body Harness Adela HS4501 & Lanyard with Energy Absorber Adela EF32 Type E 45
MATERIAL 45mm width Polyester Webbing
HARDWARE Zinc Plated Steel
ANCHOR POINT Rear
D-RING 1
BUCKLE Pass Through
ADJUSTABLE Chest/Legs
SKU: n/a -
-
Breathing Apparatus, Diablo
Self Contained Breathing Apparatus Model 43425120 & 6.8lt x 300 Bar Composite Cylinder Model 42000888
Breathing Apparatus, DiabloSelf Contained Breathing Apparatus Model 43425120 & 6.8lt x 300 Bar Composite Cylinder Model 42000888
Diablo Industrial is a breathing apparatus, specially designed and developed for the industrial sector. Diablo Industrial range includes self-contained open circuit breathing apparatuses with full face mask and demand valve, in compliance with EN 137.
- L’autorespiratore Diablo Industrial Tipo 1 è realizzato in modo da poter essere utilizzato in atmosfere potenzialmente esplosive.
- Type 2 is also available in a MED-certified version.
TOTAL PROTECTION
COMFORTABLE
RELIABLESKU: n/a -
HC Safety, Safety Goggles
Safety Goggles A611-2A
- Light weight clear PVC body to fit most face shapes
- Indirect ventilation system for dust and liquid & droplets splash protection
- Comfort nose bridge
- Polycarbonate lens for medium energy impact protection
- Anti-scratch / Anti-mist lens available
- Private labeling available
- Tested and approved to CE EN166 & UKCA EN166, 170,ANSI Z87.1, AS/NZS 1337 standards
SKU: n/a -
HC Safety, Safety Goggles
Safety Goggles A611-3A
- Light weight clear PVC body to fit most face shapes
- Polycarbonate lens for medium energy impact protection
- Direct ventilation system for dust protection
- Comfort nose bridge
- Anti-scratch / Anti-mist lens available
- Private labeling available
- CE EN166 & ANSI Z87.1, AS/NZS 1337
SKU: n/a -
S2H, Safety Helmet
ABS Vented Safety Helmet SH2003 (SN-100)
Item No.: SH-2003 Vented Safety Helmet
Compliance: EN 397, ANSI Z89.1-2009, ANS approval
Shell material: ABS
Suspension: Nylon 6-points Ratchet
Size: 52-63cm adjustable quick
Color: white, yellow, orange, blue, red
Character: A lightweight shell with patent industrial safety helmet with strengthened structure of the internal protection, striking contemporary design offers the wearer great protection against impact. Air flow system lets heat escape, keeping workers cooler and therefore promoting compliance. Rain trough for water disbursement.
SKU: n/a -
Clamp Meters, HIOKI, Testing & Measuring
AC/DC CLAMP METER CM4375
Easily Get Into Tight Spaces
Innovative Jaw Provides Remarkable Accessibility
Inrush Current Measurement Accuracy GuaranteedKey Features
- CAT IV 600 V, CAT III 1000 V
When using P2000: CAT III 2000 V, CAT IV 1000 V - Automatic AC/DC function helps boost work efficiency, Measure up to 1000 A
- Easily get into tight spaces between cables thanks to thin sensor structure
- Simultaneously measure inrush current in RMS and crest values
- Measure DC voltages of up to 2000 V (*1) for open voltage inspections of solar panels
- Easily transfer measurement data to your smartphone or tablet by using our free app GENNECT Cross or to an Excel® file. (*2)
- Harmonic analysis from 1st to 30th order with GENNECT Cross (*2)
- *1:When using the optional DC High Voltage Probe P2000. The clamp meter itself is capable of measuring up to 1000 V DC.
- *2:Wireless Adapter Z3210 is necessary.
SKU: n/a - CAT IV 600 V, CAT III 1000 V
-
INSULATING GLOVES, REGELTEX, Safety
REGELTEX INSULATING GLOVES – Class 4 (36000V)
DESCRIPTION
Insulating gloves range for use against electrical hazards in Class III (mortal risks). Electrical
insulating gloves offer an effective personal protection for all persons required for live working
operations.STANDARD
EN 60903:2003 – CEI 60903:2002
PPE Category III (Directive 89/686/EEC)Color : Beige
Size : 10
Category : RC
Thickness : <4.2mm
Max Operating Voltage : 36000V
Proof Test Voltage : 40000V
SKU: n/a
Product Carousel Tabs
Kett, Moisture Testers, Testing & Measuring
Grain Moisture Tester PM-650 (6507)
Can measure moisture and bulk density of grains and seeds (See the brochures for applications)
No preliminary sample treatment required
Non-destructive measurement by only placing a sample
Features automatic weight compensation
SKU: n/a
Conductivity/TDS/Salinity Meters, EXTECH, PH Meters, Temperature Meter, Testing & Measuring
Extech RE300: ExStik® ORP Meter
Conductivity/TDS/Salinity Meters, EXTECH, PH Meters, Temperature Meter, Testing & Measuring
Extech RE300: ExStik® ORP Meter
Measures ORP/Redox from -999 to 999mV
Automatic electronic self calibration
Simulated analog bargraph displays change in ORP reading
High resolution of 1mV
Memory stores and recalls 15 readings and saves last calibrated value
Data validation indicators show user the reading is stabilized
Data Hold, Auto shut-off and low battery indication
SKU: n/a
Conductivity/TDS/Salinity Meters, EXTECH, PH Meters, Temperature Meter, Testing & Measuring
PH90: Waterproof pH Meter
Conductivity/TDS/Salinity Meters, EXTECH, PH Meters, Temperature Meter, Testing & Measuring
PH90: Waterproof pH Meter
Rugged replaceable flat surface pH electrode for quick on-the-spot pH measurements
Simultaneous display of pH and Temperature
2 or 3 point calibration automatically recognizes buffer solutions (order pH buffers separately)
PTS (percent of slope) tells you when it’s time to replace your electrode (below 70% or above 130%)
Automatic Temperature Compensation
Data Hold, Min/Max, Auto Power Off, and low battery indication
Waterproof design (IP57) floats in water and protects the meter in wet environment
Complete with flat surface pH electrode, protective sensor cap, and two 3V CR-2032 button batteries
SKU: n/a
Air Quality Meters, EXTECH, Testing & Measuring
DO600: Waterproof ExStik® II Dissolved Oxygen Meter
Oxygen level displayed as % Saturation or Concentration (mg/L [ppm])
Adjustable Altitude Compensation (0-20,000ft in 1,000ft increments)
Adjustable Salinity Compensation from 0 to 50ppt
Analog bargraph indicates trends
Memory stores up to 25 data sets with DO and Temperature reading
Self calibration on power up
Data Hold, Auto power off, Low battery indicator
SKU: n/a
EXTECH, IR Thermometers, Testing & Measuring
VIR50: Dual Laser IR Video Thermometer
Non-contact IR Temperature measurement from -58 to 3992°F (-50 to 2200°C) with 50:1 distance to target ratio
Built-in VGA (640 x 480) Camera
MicroSD card for capturing images (JPEG) and video (3GP) for viewing on your PC
Dual laser indicates ideal measuring distance where the two laser points converge to a 1″ target spot
Fast 150 millisecond response time, color LED bargraph for viewing trends
Type K Thermocouple input, USB interface
Air Temperature and Relative Humidity measurement
Adjustable emissivity increases measurement accuracy for different surfaces
Adjustable High/Low set points with audible alarm alerts user when temperature exceeds the programmed set points
MAX/MIN/AVG/DIF functions, Auto Power Off
Complete with microSD card, general purpose Type K bead wire probe, USB cable, rechargeable 3.7V battery, and carrying case
SKU: n/a
EXTECH, IR Thermometers, Testing & Measuring, Thermometers
IR270: IR Thermometer with Color Alert
Take non-contact temperature measurements from -4 to 1202°F (-20 to 650°C)
Max resolution of 0.1°F/°C and basic accuracy of ±(1% of reading + 2°F/1°C)
12:1 distance to spot (target) ratio
Built-in laser pointer identifies target area with on/off button
Programmable Hi/Low alarms with audible beeper — tri-color LCD display changes to Blue backlight when reading goes below low alarm setting and Red backlight when reading exceeds High set point
Adjustable emissivity (0.10 to 1.00) increases measurement accuracy
Record/Recall up to 20 readings
Automatic Data Hold when trigger released
MAX/MIN/AVG/DIF functions
Bright white backlighting illuminates display for taking measurements at night or in areas with low background light levels
Auto power off
Low battery indicator
Dimensions: 7.1×4.2×1.6″ (180x107x40mm)
Weight: 5.3oz (150g)
Complete with 9V battery and pouch
SKU: n/a
EXTECH, IR Thermometers, Testing & Measuring, Thermometers
42510A: Wide Range Mini IR Thermometer
IR Temperature range: -58 to 1200°F (-50 to 650°C)
High resolution of 0.1° up to 199.9°
High/Low setpoints with audible alarm
0.10 to 1.00 adjustable emissivity for better accuracy on different surfaces
Built-in laser pointer for easy targeting
Large backlit LCD display
Data Hold and Min/Max, overrange indicator, auto power off
Complete with 9V battery and pouch case
SKU: n/a
Contact Thermometers, EXTECH, Testing & Measuring, Thermometers
TM500: 12-Channel Datalogging Thermometer
Contact Thermometers, EXTECH, Testing & Measuring, Thermometers
TM500: 12-Channel Datalogging Thermometer
Simultaneously displays CH1 to CH8 or CH9 to CH12
Offset adjustment used for zero function or to make relative measurements
Stores 99 readings manually
Datalogging feature records readings with date and time stamp on an SD card (included) in Excel® format
User programmable sampling rate from 1 to 3600 seconds
Min/Max, Data Hold, Auto Power Off
Complete with 8 AA batteries, 12 general purpose Type K bead wire temperature probes, SD card, and hard carrying case
SKU: n/a
Contact Thermometers, EXTECH, Testing & Measuring, Thermometers
Extech EA10: EasyView™ Dual Input Thermometers
Contact Thermometers, EXTECH, Testing & Measuring, Thermometers
Extech EA10: EasyView™ Dual Input Thermometers
Temperature range: -200 to 1999°F (-200 to 1360°C) with 0.1°/1° resolution
Compact and rugged design features large backlit display
Displays [T1 plus T2] or [T1-T2 plus T1] or [T1-T2 plus T2]
Timer function displays elapsed time plus the time when MIN and MAX readings are taken
Data Hold, Auto power off, low battery and overrange indication
Records Max/Min readings for later recall
OFFSET key used for zero function to make relative measurements
Complete with built-in stand, protective holster, two Type K bead wire temperature probes and batteries
SKU: n/a
Amprobe, Clamp Meters
Amprobe ACDC-52NAV AC/DC CAT IV 600 A TRMS Navigator Clamp Meter
True-rms technology improves accuracy in noisy environments
Measures AC/DC voltage to 1000 V, AC/DC current to 600 A, plus resistance, frequency, capacitance, power and power factor, total harmonics distortion (THD) and individual harmonics from 1 to 25
Includes inrush current measurement and phase rotation indication for 3-phase motors
Non-contact voltage detection enhances safety
Low pass filter enables measuring voltage and frequency on variable frequency drives
Continuity beeper quickly identifies shorts and opens
Large backlit digital display with analog bar graph presents the full picture
Min, max and smart data hold
Peak hold identifies spikes and transients
In-jaw flashlight automatically lights when jaws open to illuminate dark panels and junction boxes
Auto power off conserves battery life
Maximum jaw opening accommodates large conductors up to 1.45″ (37 mm)
Rubber overmold body absorbs shocks—drop proof to 4 feet (1.2 m)
CAT IV-rated AC/DC current clamp meter
SKU: n/a
Digital Multimeters, Fluke, Testing & Measuring
Fluke 117 Electrician’s Multimeter with Non-Contact Voltage
Digital Multimeters, Fluke, Testing & Measuring
Fluke 117 Electrician’s Multimeter with Non-Contact Voltage
Accurate, easy-to-use multimeter with integrated VoltAlert™ technology for non-contact voltage detection
Features AutoVolt automatic AC/DC voltage selection
Provides low input impedance to help prevent false readings due to ghost voltage
Presents a large white LED backlight for working in poorly lit areas
Features True RMS capabilities for accurate measurements on non-linear loads
Measures 10 A (20 A overload for 30-seconds)
Measures resistance, continuity, frequency, and capacitance
Provides Min/Max/Average to record signal fluctuations
Comes with an holster with probe holders for easy storage
Features compact ergonomic design for one-handed operation
Fits into optional ToolPak™ magnetic hanger for hands-free operation
CAT III 600 V safety rated
A large white LED backlight to improve measurement visibility in poorly lit areas
VoltAlert™ technology for fast, go/no go non-contact voltage detection
AutoVolt and low input impedance modes to provide faster, more accurate readings
For commercial electricians, commercial and residential electrical work
SKU: n/a
Clamp Meters, Fluke, Testing & Measuring
Fluke 317 Clamp Meters
Key features
The two models are economic, compact and offer a range of special features:
Unique 40A high-precision low current measurement–0.01A high-resolution, 1.6% high-precision measurement
The clamps are slim, lightweight, and portable, making them ideal for use in small, confined spaces
The large backlight display facilitates readings in dark environments
Starting current (inrush) functionality (319) allows measurement of the starting current of electrical and lighting equipment, for example. (319)
Current frequency measurement
Precision down to 0.01A and 0.1V
1000A/600A AC/DC current measurement (319/317)
600V AC/DC voltage measurement
4000Ω resistance measurement
Continuity beeper
Auto off function enhances battery life, meaning the instrument can work when you need it screen store ‘hold’ function for capturing a measurement result on the screen
One year warranty
SKU: n/a
KYORITSU, Power Quality Analyzers, Solar Test Tools, Testing & Measuring
Power Quality Analyzer and Clamp Sensor set model
KEW 6315-01
Power Quality Analyzer and Clamp Sensor set model
KEW 6315 ＋ KEW 8125（500A : φ40mm）× 3
• Simultaneous Power & Power quality measurements
• Helpful support functions
• Measurement with high accuracy
• Remote monitoring on PC and Android device
• Various Clamp Current Sensors
• Energy consumption check on site
• IEC 61010-1 CAT IV 300V, CAT III 600V, CAT II 1000V
SKU: n/a
Amprobe, Clamp Meters
Amprobe ACDC-52NAV AC/DC CAT IV 600 A TRMS Navigator Clamp Meter
True-rms technology improves accuracy in noisy environments
Measures AC/DC voltage to 1000 V, AC/DC current to 600 A, plus resistance, frequency, capacitance, power and power factor, total harmonics distortion (THD) and individual harmonics from 1 to 25
Includes inrush current measurement and phase rotation indication for 3-phase motors
Non-contact voltage detection enhances safety
Low pass filter enables measuring voltage and frequency on variable frequency drives
Continuity beeper quickly identifies shorts and opens
Large backlit digital display with analog bar graph presents the full picture
Min, max and smart data hold
Peak hold identifies spikes and transients
In-jaw flashlight automatically lights when jaws open to illuminate dark panels and junction boxes
Auto power off conserves battery life
Maximum jaw opening accommodates large conductors up to 1.45″ (37 mm)
Rubber overmold body absorbs shocks—drop proof to 4 feet (1.2 m)
CAT IV-rated AC/DC current clamp meter
SKU: n/a
EXTECH, Light Meters, Testing & Measuring
UV510: UVA Light Meter
Sensor wavelength range 320 to 390nm
UV sensor with cosine correction measures irradiance from UVA light sources up to 20.00mW/cm²
Backlit LCD to view in dimly lit areas
Zero function
Data Hold and Min/Max functions
Auto power off with disable
Tripod mount (optional TR100 Tripod sold separately)
Complete with wrist strap, light sensor cover, and three AAA batteries
SKU: n/a
EXTECH, On Sale, Testing & Measuring, Vibration Meters, Vibration Testers
Extech VB400
Measures RMS Acceleration and Velocity with metric and imperial units of measure
Measurement ranges:
Acceleration (RMS): 656ft/s2; 20.39g; 200m/s2
Velocity (RMS): 7.87in/s; 2.00cm/s; 200mm/s
Wide frequency range of 10Hz to 1kHz
Resolution to 1ft/s2; 0.01g; 0.1m/s2 and 0.02in/s; 0.01cm/s; 0.1mm/s
Basic accuracy of ±(5% + 2 digits)
Zero adjustment, Data Hold, Low battery indicator
Water and dust resistant to IP65
Complete with test pin tip, magnetic base, 4 x AAA batteries, and pouch case
SKU: n/a
Keson, Measuring Wheels, Tools & Utilities
KESON RRT12 TOP READING, CENTER-LINE WHEELStt
FEATURES
Enhanced grip pistol-type handle increases control and comfort.
Re-set on the handle AND on the unit housing — no more bending over, lifting the wheel or stepping on it to reset to zero. Additionally, the re-set on the housing is reinforced to protect it when re-setting the counter with your foot.
Brake on pistol grip — stops counting instantly. Stop adding lengths accidentally by putting the brake on exactly when you need it.
Collapsing hinge — snaps into extended lock with the flick of the wrist and it disconnects if you forget to press the unlock trigger.
Center-line handle design with counter on top of wheel — center of gravity aligned for perfect balance. This makes measuring easier and more accurate. The raised counter makes reading it easier.
Compact fold-down — easily reduces to 1/2 its size for storage and portability. Storage is a snap.
Flip-down kickstand (3 foot size) — keeps the wheel upright when you need your hands free to perform other tasks and stays out of the way as you measure.
Gear & shaft transmission for highest measurement accuracy and strength. No belts to stretch or fail.
Handle lock — lock your handle in place when you’re not using the wheel. Our clamp protects the extension hinge from breaking.
Bags available for these wheels
SKU: n/a
Adela, Body Harness
Full Body Harness Adela HS4501 & Lanyard with Energy Absorber Adela EF32 Type E 45
Adela, Body Harness
Full Body Harness Adela HS4501 & Lanyard with Energy Absorber Adela EF32 Type E 45
Full Body Harness Adela HS4501 & Lanyard with Energy Absorber Adela EF32 Type E 45
MATERIAL 45mm width Polyester Webbing
HARDWARE Zinc Plated Steel
ANCHOR POINT Rear
D-RING 1
BUCKLE Pass Through
ADJUSTABLE Chest/Legs
SKU: n/a
Breathing Apparatus, Diablo
Self Contained Breathing Apparatus Model 43425120 & 6.8lt x 300 Bar Composite Cylinder Model 42000888
Breathing Apparatus, Diablo
TOTAL PROTECTION
COMFORTABLE
RELIABLE
Self Contained Breathing Apparatus Model 43425120 & 6.8lt x 300 Bar Composite Cylinder Model 42000888
Diablo Industrial is a breathing apparatus, specially designed and developed for the industrial sector. Diablo Industrial range includes self-contained open circuit breathing apparatuses with full face mask and demand valve, in compliance with EN 137.
L’autorespiratore Diablo Industrial Tipo 1 è realizzato in modo da poter essere utilizzato in atmosfere potenzialmente esplosive.
Type 2 is also available in a MED-certified version.
TOTAL PROTECTIONCOMFORTABLERELIABLESKU: n/a
HC Safety, Safety Goggles
Safety Goggles A611-2A
Light weight clear PVC body to fit most face shapes
Indirect ventilation system for dust and liquid & droplets splash protection
Comfort nose bridge
Polycarbonate lens for medium energy impact protection
Anti-scratch / Anti-mist lens available
Private labeling available
Tested and approved to CE EN166 & UKCA EN166, 170,ANSI Z87.1, AS/NZS 1337 standards
SKU: n/a
HC Safety, Safety Goggles
Safety Goggles A611-3A
Light weight clear PVC body to fit most face shapes
Polycarbonate lens for medium energy impact protection
Direct ventilation system for dust protection
Comfort nose bridge
Anti-scratch / Anti-mist lens available
Private labeling available
CE EN166 & ANSI Z87.1, AS/NZS 1337
SKU: n/a
S2H, Safety Helmet
ABS Vented Safety Helmet SH2003 (SN-100)
Item No.: SH-2003 Vented Safety Helmet
Compliance: EN 397, ANSI Z89.1-2009, ANS approval
Shell material: ABS
Suspension: Nylon 6-points Ratchet
Size: 52-63cm adjustable quick
Color: white, yellow, orange, blue, red
Character: A lightweight shell with patent industrial safety helmet with strengthened structure of the internal protection, striking contemporary design offers the wearer great protection against impact. Air flow system lets heat escape, keeping workers cooler and therefore promoting compliance. Rain trough for water disbursement.
SKU: n/a
Hot Products
-
Digital Multimeters, Fluke, Testing & Measuring
Fluke 117 Electrician’s Multimeter with Non-Contact Voltage
Digital Multimeters, Fluke, Testing & MeasuringFluke 117 Electrician’s Multimeter with Non-Contact Voltage
- Accurate, easy-to-use multimeter with integrated VoltAlert™ technology for non-contact voltage detection
- Features AutoVolt automatic AC/DC voltage selection
- Provides low input impedance to help prevent false readings due to ghost voltage
- Presents a large white LED backlight for working in poorly lit areas
- Features True RMS capabilities for accurate measurements on non-linear loads
- Measures 10 A (20 A overload for 30-seconds)
- Measures resistance, continuity, frequency, and capacitance
- Provides Min/Max/Average to record signal fluctuations
- Comes with an holster with probe holders for easy storage
- Features compact ergonomic design for one-handed operation
- Fits into optional ToolPak™ magnetic hanger for hands-free operation
- CAT III 600 V safety rated
- A large white LED backlight to improve measurement visibility in poorly lit areas
- VoltAlert™ technology for fast, go/no go non-contact voltage detection
- AutoVolt and low input impedance modes to provide faster, more accurate readings
- For commercial electricians, commercial and residential electrical work
SKU: n/a -
Digital Multimeters, Fluke, Testing & Measuring
Fluke 115 Field Technicians Digital Multimeter
- Ideal for quick verifications and field service
- Presents a large white LED backlight for working in poorly lit areas
- Measures AC and DC voltage to 600V
- Measures AC and DC current to 10A (20 A overload for 30-seconds max)
- Measures resistance, continuity, frequency, and capacitance
- Provides Min/Max/Average with elapsed time to record signal fluctuations
- Comes with a holster with probe holders for easy storage
- Features a compact ergonomic design for one-handed operation
- Fits into optional ToolPak™ magnetic hanger for hands-free operation
- CAT III 600 V safety rated
- For field service technicians, basic electronic repair.
SKU: n/a -
-
Digital Multimeters, Fluke, Testing & Measuring
Fluke 179 Digital Multimeter and EDA2 Accessories Kit
Digital Multimeters, Fluke, Testing & MeasuringFluke 179 Digital Multimeter and EDA2 Accessories Kit
Key features
- A full-featured, precision multimeter for troubleshooting electrical and electronic systems
- Delivers accurate true-rms ac current and voltage plus frequency, capacitance, resistance, continuity and diode measurements
- SureGrip™ test leads, test probes and alligator clips
- Includes ToolPak magnetic meter-hanger for easy viewing when using two hand to make measurements
SKU: n/a -
Digital Multimeters, Fluke, Solar Test Tools, Testing & Measuring
Fluke 179/EJKCT Multimeter
- 1000V AC/DC; 10A AC/DC (with test leads and current jacks); resistance to 50 M?; capacitance to 10,000 ?F, frequency to 100 kHz; temperature from -40 ? to 400 ?
- Robust, fast and accurate with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-Average recording
- Backlit digital display, analog bar graph, and built-in temperature measurements with included thermocouple.
SKU: n/a -
Digital Multimeters, Fluke, Testing & Measuring
Fluke 233 Remote Display Digital Multimeter
- True RMS Digital Multimeter with detachable display
- Measures up to 1000 VAC and DC
- Measures up to 10 A (20 A for 30 seconds)
- Provides a 10,000 ?F capacitance range
- Measures frequency to 50 kHz
- Includes a built-in thermometer to measure temperature without a separate instrument
SKU: n/a -
Digital Multimeters, Fluke, Testing & Measuring
Fluke 279 FC True-rms Thermal Multimeter
- Safer and rugged: Safety rated CAT III 1000 V, CAT IV 600 V
- Save time: With built-in Fluke Connect®, transmit results wirelessly to a smartphone
- Flexibility: Compatible with iFlex® to expand your measurement capabilities and get into tight, hard to reach spaces for current measurement
- Accurate results: Full-featured multimeter with built-in thermal imager
- True-RMS AC voltage and current for measuring non-linear signals
SKU: n/a -
Digital Multimeters, Fluke, Testing & Measuring
Fluke 28 II Ex Intrinsically Safe True RMS Digital Multimeter
Digital Multimeters, Fluke, Testing & MeasuringFluke 28 II Ex Intrinsically Safe True RMS Digital Multimeter
Key features
- A completely sealed, IP67 rated case
- Withstands drops up to 10 ft or 3 m (with holster)
- Dustproof per IEC 60529 IP6x
- Waterproof per IEC 60529 IPx7
- CAT III 1000 V, CAT IV 600 V
- Reversible holster for added protection of the display when not in use
SKU: n/a -
Digital Multimeters, Fluke, Testing & Measuring
Fluke 289 True-RMS Data Logging Multimeter
Key features
- Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
- TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
- Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
- Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
- Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
- LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
- Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
- Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
- Measure up to 10 A (20 A for 30 seconds).
- 100 mF capacitance range.
SKU: n/a -
Digital Multimeters, Fluke, Testing & Measuring
Fluke 87V MAX True-rms Digital Multimeter
- This electrical multimeter contains all the trusted features of the most popular multimeter used today, the Fluke 87V, plus much more.
- More rugged: The 87V MAX multimeter withstands drops up to 4-meters (13 feet) with industrial strength casing and holster
- Use it everywhere: Waterproof, dustproof IP67 case for the most extreme work sites
- Easy to use: Large display digits, backlit keys for dark environments and double the battery life of the 87V (up to 800 hours)
- Save time: Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
- Premium TL175 TwistGuard™ test leads
SKU: n/a
-
Kett, Moisture Testers, Testing & Measuring
Grain Moisture Tester PM-650 (6507)
- Can measure moisture and bulk density of grains and seeds (See the brochures for applications)
- No preliminary sample treatment required
- Non-destructive measurement by only placing a sample
- Features automatic weight compensation
SKU: n/a -
Conductivity/TDS/Salinity Meters, EXTECH, PH Meters, Temperature Meter, Testing & Measuring
Extech RE300: ExStik® ORP Meter
Conductivity/TDS/Salinity Meters, EXTECH, PH Meters, Temperature Meter, Testing & MeasuringExtech RE300: ExStik® ORP Meter
- Measures ORP/Redox from -999 to 999mV
- Automatic electronic self calibration
- Simulated analog bargraph displays change in ORP reading
- High resolution of 1mV
- Memory stores and recalls 15 readings and saves last calibrated value
- Data validation indicators show user the reading is stabilized
- Data Hold, Auto shut-off and low battery indication
SKU: n/a -
Conductivity/TDS/Salinity Meters, EXTECH, PH Meters, Temperature Meter, Testing & Measuring
PH90: Waterproof pH Meter
Conductivity/TDS/Salinity Meters, EXTECH, PH Meters, Temperature Meter, Testing & MeasuringPH90: Waterproof pH Meter
- Rugged replaceable flat surface pH electrode for quick on-the-spot pH measurements
- Simultaneous display of pH and Temperature
- 2 or 3 point calibration automatically recognizes buffer solutions (order pH buffers separately)
- PTS (percent of slope) tells you when it’s time to replace your electrode (below 70% or above 130%)
- Automatic Temperature Compensation
- Data Hold, Min/Max, Auto Power Off, and low battery indication
- Waterproof design (IP57) floats in water and protects the meter in wet environment
- Complete with flat surface pH electrode, protective sensor cap, and two 3V CR-2032 button batteries
SKU: n/a -
Air Quality Meters, EXTECH, Testing & Measuring
DO600: Waterproof ExStik® II Dissolved Oxygen Meter
- Oxygen level displayed as % Saturation or Concentration (mg/L [ppm])
- Adjustable Altitude Compensation (0-20,000ft in 1,000ft increments)
- Adjustable Salinity Compensation from 0 to 50ppt
- Analog bargraph indicates trends
- Memory stores up to 25 data sets with DO and Temperature reading
- Self calibration on power up
- Data Hold, Auto power off, Low battery indicator
SKU: n/a -
EXTECH, IR Thermometers, Testing & Measuring
VIR50: Dual Laser IR Video Thermometer
- Non-contact IR Temperature measurement from -58 to 3992°F (-50 to 2200°C) with 50:1 distance to target ratio
- Built-in VGA (640 x 480) Camera
- MicroSD card for capturing images (JPEG) and video (3GP) for viewing on your PC
- Dual laser indicates ideal measuring distance where the two laser points converge to a 1″ target spot
- Fast 150 millisecond response time, color LED bargraph for viewing trends
- Type K Thermocouple input, USB interface
- Air Temperature and Relative Humidity measurement
- Adjustable emissivity increases measurement accuracy for different surfaces
- Adjustable High/Low set points with audible alarm alerts user when temperature exceeds the programmed set points
- MAX/MIN/AVG/DIF functions, Auto Power Off
- Complete with microSD card, general purpose Type K bead wire probe, USB cable, rechargeable 3.7V battery, and carrying case
SKU: n/a -
EXTECH, IR Thermometers, Testing & Measuring, Thermometers
IR270: IR Thermometer with Color Alert
- Take non-contact temperature measurements from -4 to 1202°F (-20 to 650°C)
- Max resolution of 0.1°F/°C and basic accuracy of ±(1% of reading + 2°F/1°C)
- 12:1 distance to spot (target) ratio
- Built-in laser pointer identifies target area with on/off button
- Programmable Hi/Low alarms with audible beeper — tri-color LCD display changes to Blue backlight when reading goes below low alarm setting and Red backlight when reading exceeds High set point
- Adjustable emissivity (0.10 to 1.00) increases measurement accuracy
- Record/Recall up to 20 readings
- Automatic Data Hold when trigger released
- MAX/MIN/AVG/DIF functions
- Bright white backlighting illuminates display for taking measurements at night or in areas with low background light levels
- Auto power off
- Low battery indicator
- Dimensions: 7.1×4.2×1.6″ (180x107x40mm)
- Weight: 5.3oz (150g)
- Complete with 9V battery and pouch
SKU: n/a -
EXTECH, IR Thermometers, Testing & Measuring, Thermometers
42510A: Wide Range Mini IR Thermometer
- IR Temperature range: -58 to 1200°F (-50 to 650°C)
- High resolution of 0.1° up to 199.9°
- High/Low setpoints with audible alarm
- 0.10 to 1.00 adjustable emissivity for better accuracy on different surfaces
- Built-in laser pointer for easy targeting
- Large backlit LCD display
- Data Hold and Min/Max, overrange indicator, auto power off
- Complete with 9V battery and pouch case
SKU: n/a -
Contact Thermometers, EXTECH, Testing & Measuring, Thermometers
TM500: 12-Channel Datalogging Thermometer
Contact Thermometers, EXTECH, Testing & Measuring, ThermometersTM500: 12-Channel Datalogging Thermometer
- Simultaneously displays CH1 to CH8 or CH9 to CH12
- Offset adjustment used for zero function or to make relative measurements
- Stores 99 readings manually
- Datalogging feature records readings with date and time stamp on an SD card (included) in Excel® format
- User programmable sampling rate from 1 to 3600 seconds
- Min/Max, Data Hold, Auto Power Off
- Complete with 8 AA batteries, 12 general purpose Type K bead wire temperature probes, SD card, and hard carrying case
SKU: n/a -
Contact Thermometers, EXTECH, Testing & Measuring, Thermometers
Extech EA10: EasyView™ Dual Input Thermometers
Contact Thermometers, EXTECH, Testing & Measuring, ThermometersExtech EA10: EasyView™ Dual Input Thermometers
- Temperature range: -200 to 1999°F (-200 to 1360°C) with 0.1°/1° resolution
- Compact and rugged design features large backlit display
- Displays [T1 plus T2] or [T1-T2 plus T1] or [T1-T2 plus T2]
- Timer function displays elapsed time plus the time when MIN and MAX readings are taken
- Data Hold, Auto power off, low battery and overrange indication
- Records Max/Min readings for later recall
- OFFSET key used for zero function to make relative measurements
- Complete with built-in stand, protective holster, two Type K bead wire temperature probes and batteries
SKU: n/a -
Amprobe, Clamp Meters
Amprobe ACDC-52NAV AC/DC CAT IV 600 A TRMS Navigator Clamp Meter
- True-rms technology improves accuracy in noisy environments
- Measures AC/DC voltage to 1000 V, AC/DC current to 600 A, plus resistance, frequency, capacitance, power and power factor, total harmonics distortion (THD) and individual harmonics from 1 to 25
- Includes inrush current measurement and phase rotation indication for 3-phase motors
- Non-contact voltage detection enhances safety
- Low pass filter enables measuring voltage and frequency on variable frequency drives
- Continuity beeper quickly identifies shorts and opens
- Large backlit digital display with analog bar graph presents the full picture
- Min, max and smart data hold
- Peak hold identifies spikes and transients
- In-jaw flashlight automatically lights when jaws open to illuminate dark panels and junction boxes
- Auto power off conserves battery life
- Maximum jaw opening accommodates large conductors up to 1.45″ (37 mm)
- Rubber overmold body absorbs shocks—drop proof to 4 feet (1.2 m)
- CAT IV-rated AC/DC current clamp meter
SKU: n/a -
-
Digital Multimeters, Fluke, Testing & Measuring
Fluke 117 Electrician’s Multimeter with Non-Contact Voltage
Digital Multimeters, Fluke, Testing & MeasuringFluke 117 Electrician’s Multimeter with Non-Contact Voltage
- Accurate, easy-to-use multimeter with integrated VoltAlert™ technology for non-contact voltage detection
- Features AutoVolt automatic AC/DC voltage selection
- Provides low input impedance to help prevent false readings due to ghost voltage
- Presents a large white LED backlight for working in poorly lit areas
- Features True RMS capabilities for accurate measurements on non-linear loads
- Measures 10 A (20 A overload for 30-seconds)
- Measures resistance, continuity, frequency, and capacitance
- Provides Min/Max/Average to record signal fluctuations
- Comes with an holster with probe holders for easy storage
- Features compact ergonomic design for one-handed operation
- Fits into optional ToolPak™ magnetic hanger for hands-free operation
- CAT III 600 V safety rated
- A large white LED backlight to improve measurement visibility in poorly lit areas
- VoltAlert™ technology for fast, go/no go non-contact voltage detection
- AutoVolt and low input impedance modes to provide faster, more accurate readings
- For commercial electricians, commercial and residential electrical work
SKU: n/a
We are also a registered vendor to the Government, Semi-Government Institutions, utility and Private Sectors.
The products, we import and distribute for the markets are exclusively represented and holding the agency status from the overseas manufacturers/suppliers. This is the key factor which is maintained and improved by Marlbo at all times.
In 2001, we incorporated Marlbo Projects (Pvt.) Ltd to focus and to cater to the modern concepts and to the ongoing infrastructure development projects in Sri Lanka.
Our utmost goal is to supply goods conforming to International standards to our customers in the power utilities and other related industries.
We strive to search for technologically advanced and sophisticated electrical products to the market.
