KEW 2300R FORK CURRENT TESTER

Out of Stock

KEW 2300R FORK CURRENT TESTER

True RMS reading is an essential feature for accurate measurement

True RMS reading is an essential feature for accurate measurement
“Non Contact Voltage” function indicates the presence of AC voltage by warning the user with an audible signal
Zero adjustment of DC current is possible at the push of a button
Auto Power Off
Minimum resolution 0.1A

LKR 53,930

Out of stock

Sampath Bank Payment Plans

The installment payment calculations now include the VAT(18%) amount of Rs.9707.4, bringing the total cost to Rs.63637.4. All displayed amounts reflect this inclusive pricing for complete transparency.

Month(s)	Handling Fee (%)	Monthly (Approx)	Total (Approx)
3	0.00%	21,212.47	63,637.40
6	0.00%	10,606.23	63,637.40

Commercial Bank Payment Plans

Month(s)	Handling Fee (%)	Monthly (Approx)	Total (Approx)
6	0.00%	10,606.23	63,637.40

Have questions? Chat with us on WhatsApp. We're here to help!

Current measurement	AC A 0 to 100.0A ±2.0%rdg±5dgt [50/60Hz] DC A 0 to ±100.0A ±2.0%rdg±5dgt
Crest factor	2.5
Non contact voltage	Detect AC voltage without contacting with socket wire. During voltage detection, "Hi" flashes and a buzzer sounds.
Maximum digit	1,049
Conductor size	Max φ10mm
Safety Standard	IEC 61010-1 CAT III 300V Pollution degree 2
Power source	R03 (AAA)(1.5V)× 2 (Auto power off: Approx.10 minutes) *Continuous measuring time: AC A Approx. 46 hours, DC A Approx. 52 hours
Dimension	161(L) × 40(W) × 30(D)mm
Weight	110g (including battery)
Accessories	9113 (Carrying Case) R03 (1.5V) × 2 Instruction Manual

Product Overview

KEW 2300R can be used in crowded connection boxes, where cables are very short, and space is too limited to clamp cables using a traditional clamp meter.

True RMS (Root Mean Square) Value Measurement

When load current is not affected by the distortion, both averaging value type and true RMS (root mean square) type clamp meters show the almost same value of about 10A with constant wave-form as the above display samples. However, when load current is affected by some distortions such as inverter, etc…,averaging value type clamp meter indicates 5.5A instead of 9.7A and true RMS type clamp meter indicates 7.9A instead of 9.7A with irregular wave-form. Accordingly, true RMS type clamp meter is recommendable for the measurement of the equipment with inverter control devices.
Due to the use of thyristors, inverters and other energy-saving controllers in recent electric wiring, current waveforms often include harmonic components and are distorted compared to sinusoidal waves (50/60Hz).
The Kyoritsu True RMS value tester is able to measure distorted waveforms using true RMS since waveforms are being internally calculated continuously. In contrast, when measurements are made with a averaging value tester, errors are generated in the measurement value because the tester cannot continuously track distorted waveforms.

(Compared to the true RMS value tester, measurement values for the averaging value generate more than 30% errors in some cases.)